KWA-8000

FEATURE

  • Built-in pre-inspection program for a beginner.
  • Analize the reasons of vehicle problems.
  • Easy to set up new vehicle and perfect accomplishment vehicle type.
  • Easy and fast run-out compensation.
  • Fast working with representation of swing angles on the screen when you measure caster.
  • Easy to care customers with memory store function through all kinds of vehicle type.
  • Free upgrade version when new technic of function id developed.
  • RS232 output connection for external computer.
  • Very low spoiler programme enabling full measurement of vehicles with extremely low front spoilers.
  • Steering rack height adjustment programme for vehicle with adjustable height steering racks.
  • 4 wheel steering programme (4ws) giving rear wheel turning angles if required.
  • Throughout the operating programme (and calibration programme) are ¡°help¡± message designed to quickly resolve operator queries without the need to resort to the operation manual.
  • Three-dimensional graphic guide, with comments for adjustment of the angles. Direct access during and display of manufacturer¡¯s data. Color print-out about measurement report.
  • High quality IBM compatible computer with hard disk and 3.4¡±FDD.

 

 

 

 

     Screen for Measurement
 Can select the correcting part prior to performing as the screen displays the cross-value and measured value at the same  time after front/rear wheel measurement.

       Screen for Correction
 Easy to work from long distance as it has the enlarged screen function. Quick alignment can be done as the screen displays the accurate angles and numeral values of correction.

          Input New Vehicle
 Complete alignment for every vehicle type with simple input and modification for a new vehicle.

            Color (option)

 ACCESSORY

 

 

 

 

Turntable(4pcs)

4 Point Clamp (Standard)
2 Point Clamp (option)

Steering wheel & Break Locker

Measuring Head (4pcs)

Ink-jet Color Printer

 

SPECIFICATION

KWA-8000

Control system

   32 byte micro-computer

Sensor mode

   6,8 Infrared-ray sensor

Display Mode

   17¡±color moniter

Output form

   Ink-jet A4 printer

Data transfer mode

   RS 232C

Applicated wheel size

   10¡±- 18¡±

Analize ability
  • toe : ±0.1mm
  • set back : ±0.1mm
  • camber : ±0.12°
  • caster : ±0.15°

Measure limits
  • L/R toe : ±10mm
  • total toe : ±20mm
  • camber : ±8°
  • caster : ±18°
  • king-pin angle : ±18°
  • set back (front) : ±2°
  • set back (rear) : ±2°
  • thrust : ±2°

Power voltage

   220 v / 1ph / 50-60Hz

Consumpion of Electic

   230w

Communication mode

   4HEAD Cable mode
   700(L) x 700(W) x 1,620(H)

Size